Stacey DelVecchio

Stacey DelVecchio

Additive Manufacturing Product Manager, Caterpillar Inc
Dunlap, IL


Sai Gowthami (Sai) Asam
Umit Ozkan
Jocelyn Cole
Zahra Khan
Elizabeth Bierman
Sandra Begay
Andrea Armani
Kelly Hon
Damayanti Chaudhuri
Quraitul Ain
Elisabeth Drake
Gina Adam
Close Up
  • What I Do
    As the Additive Manufacturing Product Manager for Caterpillar, Inc., I do 3D printing for our big yellow equipment. It’s my job to work with my team and a lot of other really smart people at Caterpillar to figure out how we best use this this exciting technology in all spaces, including new product introduction, supply chain and operations….and then do it. That means I’m constantly learning about the technology of 3D printing and am working to put it to use at Caterpillar.
  • Why Engineering?
    I know it’s not a flashy story, but I have always loved math and science. I really didn’t want to teach though as I thought I would get bored with what I perceived as the repetitive nature of teaching. In talking to my teachers and friends of the family, I thought engineering might be a good choice where I could use my love of math and science. I shadowed a family friend who was an engineer but still wasn’t really sure what engineering was. Because of this big unknown, I chose to attend the University of Cincinnati (UC) in Ohio. The engineering program at UC has a mandatory co-op program which means you can’t graduate without co-oping. In my second year, I started co-oping where I went to school for one quarter, and then worked as an engineering co-op the next quarter, then went to school for one quarter and so on. The program was a five year program, but that extra year was well worth it. I graduated with 1 ½ years of engineering experience and had the opportunity early in my collegiate career to work side by side with engineers and find out what engineering was all about.
  • School Days
    B.S. in chemical engineering from the University of Cincinnati in Ohio
  • My Day At Work
    So many things…
    • o I’ve injection molded parts
    • o I’ve tested parts and created the tests myself
    • o I’ve designed and built a waste water treatment facility in China
    • o I’ve traveled the world
    • o I’ve analyzed data
    • o I’ve blogged
    • o I’ve presented to all kinds of people from just a few people to hundreds of people
    • o I’ve created project plans
    • o I’ve facilitated meetings
    • o I’ve researched existing technology.
  • Best Part
    I love the variety of the work I’ve done throughout my career as an engineer. I’ve worked on compounding new types of rubber and plastic to make parts that have properties they didn’t before. I’ve worked on the factory floor to make components for our bull dozers. I’ve worked to figure out tests to reproduce something we see on the construction site. And then I’ve spent some time pulling all this together on the computer, analyzing results and preparing my recommendations for my leadership. This combination of hands on work with time on the computer has kept me from ever getting bored.

    I also like that I’ve worked on some really cool stuff and with a whole slew of other engineers that impress me week after week. It’s very energizing to work with people that are always thinking of what we could do…and then figuring out a way to do it.

  • Proud Moments
    In 2013/2014, I proudly served as the president of the Society of Women Engineers, a worldwide organization that is over 34,000 strong.
  • Challenges
    Sometimes I’ve felt that my career has stalled and that maybe people haven’t appreciated what I have to offer. I’ve conquered this by keeping my eye on the big picture and staying positive. I’ve looked for advocates that could help me and mentors that could give me advice. I then followed their advice and of course was patient.
  • My Family
    I have an older sister and two younger brothers. I’m very close to my mom. I’ve been married for 25 years to Kerry, a fellow engineer at Caterpillar, who I met at the University of Cincinnati. We have no children, but we do have 11 nieces and nephews. I love being an aunt because you can spoil your nieces and nephews and there’s no payback from your siblings.
  • Dreams and Goals
    Short-term goals:
    • o Determine the best use of 3D printing at Caterpillar and then make it happen.
    • o Get a new hip.
    • o Become a Weight Watchers Life Member…again.
    • o Visit New Hampshire, Louisiana, North Dakota, and Oklahoma so that I can complete my tour of all 50 states.
    Long-term goals:
    • o Retire with my husband and continue to advocate for women engineers.
    • o Establish a Society of Women Engineers Fellows retreat.
    • o Learn to quilt.
    • o Stay connected technically via a board of director’s position.
  • Inspiration
    My parents were definitely the biggest influencers in my life. They installed in me a belief that I could do anything. They made sure that I realized that I had been blessed with a lot of talents and that I needed to do something with them. They helped me figure out what I wanted to do and put very few boundaries around me. When it came time to go to college, I needed to go to a state school for cost reasons, but other than that, it was pretty much up to me. It wasn’t until I was older that I realized this kind of encouraging childhood was rare. I’d like to see all little girls have this kind of positive reinforcement that they can do anything they set their minds to. They can change the world.
  • Want to be an Engineer?
    Think about how you want to change the world, and then do it. If you don’t know how, ask one of the engineers in the directory of women engineers here at
  • Additional Thoughts
    "I’d like to see all little girls have this kind of positive reinforcement that they can do anything they set their minds to. They can change the world."
  • Hobbies
    I love scrapbooking, reading, and napping. Some of my favorite books are
    • o The Martian by Andy Weir
    • o The Mold in Dr. Florey’s Coat by Eric Lax
    • o The Art of Racing in the Rain by Garth Stein
    • o The Devil in the White City by Erik Larson.
    I enjoy traveling to and hiking in National Parks with my husband of 25 years. Some of my favorite parks are Glacier National Park, Yellowstone National Park (in the winter), and Crater Lake National Park. I love animals and currently am the proud ‘mommy’ of two cats.
Stacey DelVecchio is the Additive Manufacturing Product Manager for Caterpillar where she leverages 3D printing in new product introduction, supply chain, and operations. With 27 years experience at Caterpillar, Stacey has worked on a wide range of products. She holds a B.S. in chemical engineering from the University of Cincinnati and proudly served as the 2013-2014 President for the Society of Women Engineers. She lives in Peoria, IL with her husband and their three cats.
Read More Read Less
B.S. Chemical Engineering from University of Cincinnati
Volunteer Opportunities
  • I am willing to be contacted by educators for possible speaking engagements in schools or in after school programs or summer camps.
  • I am willing to serve as science fair judge or other temporary volunteer at a local school.
  • I am willing to host a field trip to my place of employment.
  • I am willing to be interviewed by interested students via email.
  • I am willing to answer written interview questions to be posted on the EngineerGirl website.